GL640USB |
RFQ for GL640USB Required Field |
 |
| Product | Manufacturers | Pack | D/C |
| GL640USB | - | SOJ | 01+ |
The GL640USB is a low-cost, single-chip embedded controller designed for connecting an IEEE 1284 parallel port peripheral to USB. It is suitable for applications where the IC is mounted on a PCB inside a product or stand-alone applications where the chip resides in a cable connecting a standard parallel port device to an USB-capable omputer.
The GL640USB firmware/driver will allow peripheral vendors to easily migrate parallel port device to USB.
Features |
| `Low-cost solution for full-speed USB device`Applications Printer, Scanner, PC Camera, External Storage Device, CD-ROM`IEEE 1284 interface supports bi-directional communication`On-chip EPP engine`On-chip 8-bit micro-controller`USB Specification Compliance- Conforms to USB 12Mbps Specification, Version 1.0- Supports 1 device address and 4 endpoints`2 sets of 64-byte FIFO with dynamic allocation- a. 64-In/64-Out- b. 64-In0/64-In1 ping pong buffer- c. 64-Out0/64-Out1 ping pong buffer`Integrated USB transceiver`On-chip 3.3v regulator`Improved output drivers with slew-rate control to reduce EMI`12MHz external clock`On-chip PLL to support 48MHz internal clock`Internal power-on reset(POR)`Supports suspend/normal mode power management`Customized firmware/driver for scanner application`The driver allows current Win98/Win95 OSR-2 printer drivers to print seamlessly to USB`Fully plug & play compatible`Single-chip solution in cost saving 40-pin SOJ(GL640USB) / 48-pin LQFP(GL640USB-A)`Special pad-design to support EPP/USB dual-interface application |
|
SYMBOL |
Description |
MIN |
MAX |
|
VCC |
DC supply voltage |
-0.5V |
+7V |
|
VI |
DC input voltage |
-0.5V |
VCC+0.5V |
|
V I/O |
DC input voltage range for I/O |
-0.5V |
VCC+0.5V |
|
VAI/O |
DC input voltage for USB D+/D- pins |
-0.5 |
VCC+0.5V |
|
V I/OZ |
DC voltage applied to outputs in High Z state |
-0.5V |
VCC+0.5V |
|
VESD |
static discharge voltage |
4000V |
